首页 |元器件品牌

CR21-49R9F-D [KYOCERA AVX]

RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 49.9ohm, SURFACE MOUNT, 0805, CHIP;
CR21-49R9F-D
型号： CR21-49R9F-D
厂家： KYOCERA AVX    KYOCERA AVX
描述：

RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 49.9ohm, SURFACE MOUNT, 0805, CHIP

电阻器
文件： 总8页 (文件大小：266K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Resistor Product Discontinuation & Update  
We would like to take this opportunity to thank you for your patronage and the many years of  
support you have given to our resistive products. As you know we are de-emphasizing the  
product line and would like to inform you of our decision to re-alignment our product offering.  
AVX will expand our focus on our 0408 and smaller resistor array products and discontinue to  
offer our larger case size resistor chip series along with the 1206 resistor arrays. This will be  
accomplished in several stages over the next twelve months. Please refer to each product series  
below and the effective dates we will cease to supply the products.  
ꢀ Chip Resistor Series (CR63, CR32, CR21, CR10)  
Final Ship Date: February 1st, 2004  
ꢀ Chip Resistor Series (CR05)  
Final Ship Date: August 1st, 2004  
ꢀ 1206 Resistor Array Series (CRA3A4E, CRB3A4E, CRC3A4E)  
Final Ship Date: August 1st, 2004  
We would like to work closely with you during the discontinuation period and minimize any  
inconveniences that may arise. Should you have any questions or comments, please contact  
KDP Marketing.  
Thick Film Chip Resistors  
CR, CJ Series  
FEATURES  
• Low Noise  
• Nickel Barrier Terminations  
APPLICATION  
• General Purpose  
HOW TO ORDER  
CR 05 - 472 J - H  
Packaging  
T = 7" Reel/Punched Paper Tape  
(5,000 pcs/reel) except CR05  
H = 7" Reel/Punched Paper Tape  
(10,000 pcs/reel, 2mm pitch taping)  
CR03 and CR05  
D = 10" Reel/Punched Paper Tape  
(10,000 pcs/reel) CR32, CR21, CR10  
STRUCTURE AND MATERIAL  
A
B
Resistance Tolerance  
D = 0.5%  
F = 1%  
J = 5%  
Blank = Chip Jumper  
Resistance Value (3 digits or 4 digits)  
Example: 2 significant figures and 1 multiplier  
R indicator decimal or values <10Ω  
Chip Jumper = 000  
C
D
E
Size (EIA)  
Code  
A
Structure  
Coating  
Material  
Glass or Epoxy  
RuO2 Resistor  
(The same material of  
Termination for chip jumper)  
96% Alumina  
Silver  
(Ni, Sn-Pb) Plating  
03 = 0201  
05 = 0402  
10 = 0603  
21 = 0805  
32 = 1206  
B
Resistor  
Series  
CR = Resistor  
CJ = Jumper  
C
D
E
Substrate  
Termination  
Plating  
DIMENSIONS  
millimeters (inches)  
L
CR03, CJ03  
(0201)  
CR05, CJ05  
(0402)  
CR10, CJ10  
(0603)  
CR21, CJ21  
(0805)  
CR32, CJ32  
(1206)  
+0.15  
+0.15  
1.55mm  
-0.10  
+0.15  
0.80mm  
-0.10  
0.30 0.03  
W
0.50 0.05  
(0.020 0.002)  
1.00 0.05  
(0.039 0.002)  
0.20 0.15  
(0.008 0.006)  
0.20 0.10  
(0.008 0.004)  
0.35 0.05  
1.25mm  
-0.10  
+0.006  
+0.006  
(0.050mmn)  
-0.004  
2.00 0.10  
(0.080 0.004)  
0.35 0.20  
(0.014 0.008)  
0.40 0.20  
(0.016 0.008)  
0.55 0.10  
+0.006  
(0.061mmn)  
-0.004  
(0.012 0.001)  
(0.031  
)
-0.004  
0.60 0.03  
(0.024 0.001)  
1.60 0.10  
(0.063 0.004)  
0.25 0.20  
3.10 0.10  
(0.122 0.004)  
0.45 0.20  
(0.018 0.008)  
0.45 0.20  
L
0.15 0.10  
(0.006 0.004)  
C
c
c
(0.010 0.008)  
+0.20  
0.15 0.05  
(0.006 0.002)  
0.20mm  
-0.15  
d
+0.008  
(0.008mmn)  
-0.006  
(0.018 0.008)  
+0.10  
0.55mm  
-0.05  
0.23 0.05  
(0.009 0.002)  
0.50 0.10  
(0.020 0.004)  
T
+0.004  
(0.022mmn)  
-0.002  
(0.014 0.002)  
(0.022 0.004)  
d
d
SPECIFICATIONS  
Series  
CR03 (0201)  
CR05 (0402)  
0.0625 (1/16) W  
50V  
CR10 (0603)  
CR21 (0805)  
CR32 (1206)  
Rated Power  
0.050 (1/20) W  
0.10 (1/10) W  
50V  
0.125 (1/8) W  
100V  
0.25 (1/4) W  
200V  
Max.  
15V  
Working Voltage  
Resistance  
Tolerance  
F = 1%  
J = 5%  
D = 0.5%  
F = 1%  
J = 5%  
D = 0.5%  
F = 1%  
J = 5%  
D = 0.5%  
F = 1%  
J = 5%  
J = 5%  
Resistance  
Value Range  
10Ω to 1MΩ : D  
10Ω to 1MΩ : F  
1.0Ω to 10MΩ : J  
10Ω to 1MΩ : D  
10Ω to 1MΩ : F  
1.0Ω to 10MΩ: J  
10Ω to 1MΩ : D  
10Ω to 1MΩ : F  
1.0Ω to 10MΩ : J  
10Ω to 1MΩ  
10Ω to 1MΩ : F  
1.0Ω to 10MΩ : J  
Working  
Temperature  
-55 to +125°C  
-55 to +125°C  
-55 to +125°C  
-55 to +125°C  
-55 to +125°C  
2
Thick Film Chip Resistors  
CR, CJ Series  
SPECIFICATIONS  
CJ Series  
CJ05, CJ10, CJ21  
(0402, 0603, 0805 Type)  
CJ32  
(1206 Type)  
Part Number  
CJ03  
Rated Current  
Resistivity  
Working Temperature  
0.5A (70°C)  
50mΩ max.  
-55 to +125°C  
1A (70°C)  
50mΩ max.  
-55 to +125°C  
2A (70°C)  
50mΩ max.  
-55 to +125°C  
HOW TO CALCULATE RATED VOLTAGE  
E = P • R  
ꢀ
E = Rated Voltage (V)  
P = Rated Power (W)  
R = Standard Resistance Value (Ω)  
Rated voltage should be lower than max. working voltage.  
RECOMMENDED LAND PATTERN  
millimeters (inches)  
EIA Size  
0201  
0402  
0603  
0805  
1206  
0.25  
(0.010)  
0.225  
(0.009)  
0.30  
(0.012)  
0.50  
(0.020)  
0.40  
(0.016)  
0.50  
(0.020)  
0.80  
(0.031)  
0.70  
(0.028)  
0.80  
(0.031)  
1.00  
(0.039)  
0.80  
(0.031)  
1.20  
(0.047)  
2.00  
(0.079)  
0.80  
(0.031)  
1.50  
(0.059)  
C
A
B
C
A
B
B
MARKING  
DERATING CURVE  
Rated power should be reduced as below when  
temperature become higher.  
Marking available as follows:  
Series: CR32, CJ32, CR21, CJ21, CR10, CJ10  
3 digit indication  
Under high temperature, power derated as follows:  
Example: 473=47x103 = 47000 Ω = 47 kΩ  
0 = 0 Ω (Jumper)  
100 = 10 Ω  
100  
80  
102 = 1 kΩ  
105 = 1 MΩ  
60  
40  
Series: CR03, CJ03, CR05 and CJ05 - No marking  
Note: On CR32 4 digit marking is standard for  
1% and 0.5% tolerances.  
125  
20  
0
-55  
70  
STANDARD RESISTANCE VALUE  
Ambient Temp (°C)  
1.0  
E24 2.4  
5.6  
1.1  
2.7  
6.2  
1.2  
3.0  
6.8  
1.3 1.5  
3.3 3.6  
7.5 8.2  
1.6  
3.9  
9.1  
1.8  
4.3  
2.0  
4.7  
2.2  
5.1  
For 1ꢀ and .5ꢀ Tolerance  
TEMPERATURE  
10.0 10.2 10.5 10.7 11.0 11.3 11.5 11.8 12.1 12.4  
12.7 13.0 13.3 13.7 14.0 14.3 14.7 15.0 15.4 15.8  
16.2 16.5 16.9 17.4 17.8 18.2 18.7 19.1 19.6 20.0  
20.5 21.0 21.5 22.1 22.6 23.2 23.7 24.3 24.9 25.5  
E96 26.1 26.7 27.4 28.0 28.7 29.4 30.1 30.9 31.6 32.4  
33.2 34.0 34.8 35.7 36.5 37.4 38.3 39.2 40.2 41.2  
42.2 43.2 44.2 45.3 46.4 47.5 48.7 49.9 51.1 52.3  
53.6 54.9 56.2 57.6 59.0 60.4 61.9 63.4 64.9 66.5  
68.1 69.8 71.5 73.2 75.0 76.8 78.7 80.6 82.5 84.5  
86.6 88.7 90.9 93.1 95.3 97.6  
CHARACTERISTICS  
Resistance (Ω) TCR (ppm/°C)  
D, F  
10≤ R ≤1M  
J
–100 to +100  
R <10  
10≤ R ≤1M  
1M< R  
–100 to +600  
–200 to +200  
–500 to +300  
3
Chip Resistor Arrays  
CR, CJ, CRA, CRB, CRC Series - Test Conditions  
ELECTRICAL CHARACTERISTICS  
Standard  
Test Conditions  
Item  
Resistor  
Jumper  
Resistor  
Jumper  
Power Condition A  
(20°C, 65% RH)  
DC Resistance  
Within Initial Tolerance  
50mΩ max.  
Test Temperature: 25, 125(°C)  
ꢀR/R=R2 –R1/R1x1/T2–T1x106  
ꢀR/R = Temp. Coefficient  
(ppm/°C)  
Resistance (Ω) TCR (ppm/°C)  
*D, F  
10≤ R ≤1M  
J, CR05 = F  
R <10  
–100 to +100  
Temperature  
Characteristics  
T1 = 25(°C)  
T2 = 125(°C)  
R1 = T1 Resistance at (Ω)  
R2 = T2 Resistance at (Ω)  
–100 to +600  
–250 to +250  
–500 to +300  
10≤ R ≤1M  
1M< R  
(1) Apply 2.0 x rated voltage for (1) 2A for 5 sec.  
5 sec. (2.5 x rated voltage  
for Arrays)  
(CJ03 = 1A)  
(2) Wait 30 minutes  
(3) Measure  
(2) Wait 30 minutes  
(3) Measure resistance  
CR03 = 30V max.  
CR05 = 50V max  
CR10 = 100V max.  
CR21 = 200V max.  
CR32 = 400V max.  
CRA3A, CRB3A, CRC3A =  
100V max.  
ꢀR/R  
(2.0%+0.10Ω) max.  
of the initial value  
50mΩ max.  
resistance  
Short-time  
Overload  
No evidence of mechanical damage  
intermittent overload  
Visual  
(1) Perform 10,000 voltage  
cycles as follows:  
ON (2.0 x rated voltage,  
(1) Perform 10,000  
current cycles  
as follows:  
2.5 x for Arrays)  
1 sec. ON (2A)  
1 sec.  
ꢀR/R  
(5%+0.1Ω) max.  
of the initial value  
50mΩ max.  
OFF  
25 sec. OFF  
25 sec.  
(2) Wait 30 minutes  
(3) Measure  
Intermittent  
Overload  
(2) Stabilization time 30 min.  
without loading  
(3) Measure resistance  
CR03 = 30V max.  
resistance  
CJ03 = 1A max.  
CR05 = 50V max.  
CR10 = 150V max.  
CR21 = 200V max.  
CR32 = 400V max.  
CRA, CRB, CRC = 100V max.  
Apply 500 VAC for 1 min. (CR10 300 VAC)  
(CR05, CRA3A, CRB3A, CRC3A 300 VAC/1 sec.  
CR03 50 VAC/min.)  
Visual  
No evidence of mechanical damage  
No evidence of mechanical damage  
Dielectric  
Withstanding Voltage  
• CR03, CJ03 = 108Ω min.  
• CR05, CJ05 = 108Ω min.  
• CR10, CJ10 = 109Ω min.  
• CR21, CJ21 = 1010Ω min.  
• CR32, CJ32 = 1012Ω min.  
Insulation Resistance  
Apply 500V DC  
(CR05, CRA3A, CRB3A, CRC3A 100V DC  
CR03 50 VDC)  
9
• CRA3A, CRB3A, CRC3A = 10 Ω min.  
9
Chip Resistor Arrays  
CR, CJ, CRA, CRB, CRC Series - Test Conditions  
MECHANICAL CHARACTERISTICS  
Standard  
Test Conditions  
Item  
Resistor  
Jumper  
Resistor  
Apply the load as shown:  
Measure resistance during load application  
Jumper  
(1%+0.05Ω) max.  
of the initial value  
50mΩ max.  
ꢀR/R  
millimeters (inches)  
50  
(1.969)  
20  
(0.787)  
2 (0.079)max  
Terminal  
Strength  
R230  
Bending in  
10 seconds  
Visual  
No evidence of mechanical damage after loading  
[φ5 (0.197)]  
45 (1.772) 45 (1.772)  
PC Board = Glass epoxy t = 1.60 (0.063)  
Soldering  
Heat  
Resistance  
(1%+0.05Ω) max.  
50mΩ max.  
Immerse into molten solder at 260 5°C for 10 1 sec.  
Stabilize component at room temperature for 1 hr.  
Measure resistance.  
ꢀR/R  
of the initial value  
Visual  
No evidence of leaching  
Immerse in Rogin Flux for 2 0.5 sec. and in  
SN62 solder at 235 5°C for 2 0.5 sec.  
Solderability  
Coverage ≥95% each termination end  
(1%+0.1Ω) max.  
50mΩ max.  
2 hrs. each in X, Y and Z axis. (TTL 6 hrs.) 10 to 55 Hz  
sweep in 1 min. at 1.5mm amplitude.  
ꢀR/R  
Anti-Vibration  
Test  
of the initial value  
Visual  
No evidence of mechanical damage  
Immerse in static state butyl acetate at 20°C to 25°C  
for 30 5 sec.  
Stabilize component at room temperature for 30 min.  
then measure value.  
(0.5%+0.05Ω) max.  
50mΩ max.  
ꢀR/R  
Solvent  
Resistance  
of the initial value  
Visual  
No evidence of mechanical damage  
ENVIRONMENTAL CHARACTERISTICS  
Standard  
Test Conditions  
Item  
Resistor  
Jumper  
Resistor  
Jumper  
(1%+0.05Ω) max.  
ꢀR/R  
(1) Run 5 cycles as follows: -55 3°C for 30 min.  
125 3°C for 30 min. Room temp. for 10-15 min.  
(2) Stabilize component at room temperature for 1 hr.  
then measure value.  
50mΩ max.  
Temperature  
Cycle  
of the initial value  
Visual  
No evidence of mechanical damage  
+48  
(2%+0.1Ω) max.  
of the initial value  
(1) Dwell in -55°C chamber without loading for 1000  
-0  
Low  
Temperature  
Storage  
50mΩ max.  
ꢀR/R  
hrs.  
(2) Stabilize component at room temperature for 1 hr.  
then measure value.  
Visual  
No evidence of mechanical damage  
+48  
(3%+0.1Ω) max.  
(1) Dwell in 125°C chamber without loading for 1000  
-0  
High  
Temperature  
Storage  
50mΩ max.  
50mΩ max.  
ꢀR/R  
of the initial value  
hrs.  
(2) Stabilize component at room temperature for 1 hr.  
then measure value.  
Visual  
No evidence of mechanical damage  
(3%+0.1Ω) max.  
of the initial value  
(1) Dwell in temp.: 65°C RH90 to 95% RH chamber  
ꢀR/R  
Visual  
ꢀR/R  
Visual  
ꢀR/R  
Visual  
without loading for 1000 +48 hrs.  
-0  
Moisture  
Resistance  
(2) Stabilize component at room temperature for 1 hr.  
then measure value.  
No evidence of mechanical damage  
(3%+0.1Ω) max.  
of the initial value  
50mΩ max.  
50mΩ max.  
(1) Temp.: 70 3°C Voltage: (rated voltage) on 90 min.  
off 30 min. Duration: 1000 +48 hrs.  
-0  
Life Test  
(2) Stabilize component at room temperature for 1 hr.  
then measure value.  
No evidence of mechanical damage  
(3%+0.1Ω) max.  
of the initial value  
(1) Temp.: 40 2°C RH: 90-95% Voltage Cycle: on 90  
min. (rated voltage) off 30 min. Duration: 1000 +48 hrs.  
Loading Life  
in Moisture  
-0  
(2) Stabilize component at room temperature for 1 hr.  
then measure value.  
No evidence of mechanical damage  
10  
Packaging of Chip Component  
Automatic Insertion Packaging  
TAPE AND REEL  
REEL DIMENSIONS  
millimeters (inches)  
Tape  
Size  
A
Max.  
B
Min.  
C
D
Min.  
N
Min.  
W
T
Max.  
178  
(7)  
1.50  
13.0 0.50  
20.2  
50  
10.0 1.50  
2.50  
(0.059)  
(0.512 0.020)  
(0.795)  
(1.969)  
(0.394 0.059)  
(0.098)  
8mm  
260  
(10)  
Metric dimensions will govern.  
English measurements rounded and for reference only.  
millimeters (inches)  
PUNCHED TAPE CONFIGURATION 8MM TAPE ONLY  
Tape  
D0  
E
P0  
P2  
W
F
Size  
+0.10  
1.5000000  
1.75 0.10  
4.0 0.10  
2.00 0.05  
(0.079 0.002)  
8.00 0.20  
(0.135 0.008) (0.138 0.002)  
3.50 0.05  
-0.00  
8mm  
+0.004  
(0.05900000) (0.069 0.004) (0.157 0.004)  
-0.000  
VARIABLE DIMENSIONS  
Style  
P1  
A0  
B0  
T max.  
2.00 0.10  
(0.079 0.004)  
0.65 0.10  
(0.026 0.004)  
1.15 0.10  
(0.045 0.004)  
0.60  
(0.024)  
CR/CJ03  
CR/CJ05  
4.00 0.10 (0.157 0.004)  
or  
2.00 0.10 (0.079 0.004)  
1.10 0.20  
(0.043 0.008)  
1.90 0.20  
(0.075 0.008)  
CR/CJ/FR10  
1.65 0.20  
(0.065 0.008)  
2.40 0.20  
(0.094 0.008)  
CR/CJ/FR21  
CR/CJ/FR32  
CRB1A  
1.10  
(0.043)  
2.00 0.20  
(0.079 0.008)  
3.60 0.20  
(0.142 0.008)  
4.00 0.10  
(0.157 0.004)  
1.90 0.20  
(0.075 0.008)  
1.90 0.20  
(0.075 0.008)  
CRA3A  
CRB3A  
CRC3A  
2.00 0.20  
(0.079 0.008)  
3.60 0.20  
(0.142 0.008)  
2.00 0.10  
(0.079 0.004)  
1.25 0.20  
(0.049 0.008)  
2.50 0.20  
(0.098 0.008)  
CRB2A  
PUNCHED CARRIER  
11  
Recommended Land Patterns  
RECOMMENDED LAND PATTERNS IS REFERRED  
THE FOLLOWING FOR EXAMPLE  
millimeters (inches)  
CRA3A4E Series  
RNA4A8E Series  
0.4  
(0.016)  
0.8 (0.031)  
3.0 (0.118)  
0.4  
(0.016)  
0.8 (0.031)  
4.8 (0.189)  
CRB1A2E Series  
CRB3A4E Series  
CRB2A4E Series  
0.8 (0.032)  
0.5  
(0.020)  
0.3 - 0.4  
(0.012 - 0.016)  
0.4  
(0.016)  
0.8 (0.031)  
0.25 (0.010)  
CRC3A4E Series  
CRC2A4E Series  
0.4  
(0.016)  
0.4  
(0.016)  
0.8 (0.031)  
0.25  
(0.010)  
0.5 (0.020)  
CRC4A8E Series  
CRB6A8E Series  
0.4  
(0.016)  
0.2 (0.008)  
0.5  
(0.020)  
0.3  
(0.012)  
0.8 (0.031)  
12  
Chip Resistor and Array Kits  
SAMPLE KIT PART NUMBERS  
Part Number  
Description  
Combination 0603, 0805, 1206, 5% parts  
21 values per case size  
CRJ-E6-Kit  
100 pcs. per value (approx.)  
0402, 5% parts  
63 values  
100 pcs. per value  
CR05-E12-Kit  
CR10J-E12-Kit  
CR21J-E12-Kit  
CR32J-E12-Kit  
CR05F-E24-Kit  
CR10F-E24-Kit  
CR-ARRAY-E6-Kit  
0603, 5% parts  
63 values  
100 pcs. per value (approx.)  
0805, 5% parts  
63 values  
100 pcs. per value (approx.)  
1206, 5% parts  
63 values  
100 pcs. per value (approx.)  
0402, 1% parts  
63 values  
100 pcs. per value  
0603, 1% parts  
63 values  
100 pcs. per value  
Arrays, Various styles, CRA, CRB, CRC, RNA, 5%  
13 values per style (approx.)  
20 pcs. per value  
13  

相关型号：

CR21-49R9F-T

 Fixed Resistor, Metal Glaze/thick Film, 0.125W, 49.9ohm, 100V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
KYOCERA AVX

CR21-5230F-D

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 523ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-52R3D-D

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 0.5%, 100ppm, 52.3ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5362F-T

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 53600ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5490F-K

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 549ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5492D-D

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 0.5%, 100ppm, 54900ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5492D-T

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 0.5%, 100ppm, 54900ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5492F-D

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 54900ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5492F-K

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 54900ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5492F-S

 RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 1%, 200ppm, 54900ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5492F-SE

 RESISTOR, METAL GLAZE/THICK FILM, 0.1W, 1%, 200ppm, 54900ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX

CR21-5492F-T

 RESISTOR, METAL GLAZE/THICK FILM, 0.125W, 1%, 100ppm, 54900ohm, SURFACE MOUNT, 0805, CHIP
KYOCERA AVX
©2020 ICPDF网 联系我们和版权申明